CYBER SAFETY PRODUCTS

Pistol safe, Wall Safe, Handgun Safe, Rifle Safe, Shotgun Safe, Gun Vault, Security Products Safes, Vline, Stun Guns, Child Safety, Personal Alarm, Home Protection, Diversion Safe, Hand Held Scanner, Concealed Carry, Etc.

Hide-Away

Model:

3912-SH

Outer dimension w/door closed:

12" x 9" x 3½"

Outer dimension w/door open:

13¼" x 9" x 4¾"

Inner dimension:

11¾" x 7¾" x 2¼"

Ship Wt.

8 lbs.

 

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

One Standard Mounting Bracket (model MB2912) comes with each Hide-Away to allow easy installation under most surfaces (bed, desk, etc.). Additional Mounting Brackets may be purchased to allow the Hide-Away to be transportable. Or, additional installation possibilities are available with the purchase of the optional Universal Mounting Bracket (model UDHA). The optional universal mounting bracket enables the pistol case to be installed on top or underneath surfaces. Tamperproof screws provide security and portability.

Below are photos of an opened Hide Away Safe (with optional bracket), the standard bracket (one comes with the safe) and the universal bracket (optional accessory).

BLACK OR IVORY

$232.95

Make payments with PayPal - it's fast, free and secure!

Shown with optional Universal Mounting Bracket (UBHA).

Standard Features

  • Front opening security case features slide out felt lined drawer for easy access to contents.
  • One Quick Release Mounting Bracket (MB2912) is included with each Hide-Away for easy installation under most surfaces.
  • Additional Quick Release Mounting Brackets may be ordered to allow the case to be used in more than one location.
  • 3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
  • Five button mechanical lock for quick access with 1081 possible combinations, easy to set a personalize code.
  • No keys to lose or batteries to change.
  • The door is recessed for added pry protection.
  • Anti-Pry brackets in the interior provide additional strength and security.
  • Continuous hinge is welded on one end to prevent pin removal.
  • An optional Universal Mounting Bracket (UBHA) is available to enable the case to be installed on top of most surfaces.
  • Available in textured semi-gloss black powder coated finish.
  • Accented with gold tone pinstripe and logo design.

Quick Release Mounting Bracket

Model:

MB2912

Outer Dim:

12½"x 9¼"

Ship Wt.

2 lbs.

$25.00

Make payments with PayPal - it's fast, free and secure!

One Quick Release Mounting Bracket MB2912 is included with the Hide-Away 3912-SH.

Optional Accessory

  • Works with models 2912, and 3912.
  • Mounting Bracket allows your Hide-Away and Top Draw Case to be transported.
  • Lock tabs and thumb screws allow easy transfers, no tools are necessary to transfer case between brackets.
  • Prepunched holes enable the case to be installed directly to most surfaces.
  • For optimum security V-Line highly recommends all Security Cases be properly installed.
  • Recommended installation hardware: 4 each ¼" x 1" - 1½" lag bolts and 4 each ¼" flat washers (not included).

Universal Mounting Bracket

Model:

UBHA

Outer dimension:

13¼" x 4"

Ship Wt.

4 lbs.

$44.00

Make payments with PayPal - it's fast, free and secure!

Optional Accessory

  • Includes one special wrench to install supplied tamper proof screws.

Changing LINKS

Welcome