Desk Mate Model: 2597-S Outer dimension w/door closed: 7½" x 10½" x 2½" Outer dimension w/door open: 7½" x 11¾" x 4" Inner dimension: 6½"x 8¼" x 1¾” Ship Wt. 8 lbs. This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder. One Standard Mounting Bracket (model MBDM) comes with each Desk Mate (shown on photo of closed safe) to allow easy installation under or to the side of most surfaces (bed, desk, etc.). Additional Mounting Brackets may be purchased to allow the Desk Mate to be transportable. Or, additional installation possibilities are available with the purchase of the optional Universal Mounting Bracket (model UBDM) which is shown on the photo of the opened safe (below). The optional universal mounting bracket enables the pistol case to be installed on top or underneath surfaces. Tamperproof screws provide security and portability. Also, V Line Industries Desk Mate Pistol Safe now comes with a drawer that slides into the Desk Mate to allow easier access to the contents. The drawer is felt lined to protect the contents. BLACK ONLY $169.95 Add To Cart

Shown with optional Universal Mounting Bracket (UBDM).

Standard Features Designed to install under most surfaces with included Quick Release Mounting Bracket (MBDM). Front opening case door drops down for easy access. Desk Mate may also be installed sideways with the top bolted to the side of a surface and the door on the top. Five button mechanical lock for quick access with 1081 possible combinations, easy to set a personalize code. No keys to lose or batteries to change. One Quick Release Mounting Bracket (MBDM) is included with each Desk Mate for easy installation under most surfaces. Additional Quick Release Mounting Brackets may be ordered to allow the case to be used in more than one location. 3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt. The door is recessed for added pry protection. Anti-Pry brackets in the interior provide additional strength and security. Available in textured semi-gloss black powder coated finish. Continuous hinge is welded on one end to prevent pin removal. An optional Universal Mounting Bracket (UBDM) is available to enable the case to be installed on top of most surfaces. Accented with gold tone pinstripe and logo design.

Quick Release Mounting Bracket Model: MBDM Outer Dim: 7"x 9" Ship Wt. 2 lbs. $24.00 Add To Cart

Optional Accessory Mounting Bracket allows your Desk Mate to be transported. Lock tabs and thumb screws allow easy transfers, no tools are necessary to transfer case between brackets. Prepunched holes enable the case to be installed directly to most surfaces. For optimum security V-Line highly recommends all Security Cases be properly installed. Recommended installation hardware: 4 each ¼" x 1" - 1½" lag bolts and 4 each ¼" flat washers (not included).

Tray for Desk Mate Model: TRDM Outer dimension: 7¼" x 8½" x 1¾" Ship Wt. 3 lbs. $25.00 Add To Cart Optional Accessory This Drawer option slides into Desk Mate to allow easier access to contents. Drawer is felt lined to protect contents.

Universal Mounting Bracket Model: UBDM Outer dimension: 8¼" x 4" Ship Wt. 2 lbs.   $36.00 Add To Cart   Optional Accessory Includes one special wrench to install supplied tamper proof screws.

Changing LINKS